Art.Nr.: 1005483
Mini-Vakuum-Druck-Induktionsgießanlage 'Indutherm MC 16'
speziell entwickelt für die Anforderungen von selbständigen Goldschmieden, Schmuckateliers und Lobore in der Medizintechnik
Verwendungszweck:
- Zum Schmelzen & Gießen von Metallen bis 2000 °C.
Anwendungsgebiete:
- Die Anlage ist für kleinere Produktionsmengen bestens geeignet:
- Gießen kleinerer Mengen Metall (200 g Platin, 100 g Gold 750, 85 g Silber 925, 110 g Stahl).
- Gießen von Einzelstücken, Mustern, Rapid-Prototyping-Teile und Platin-Rohlingen zum Walzen
- In großen Produktionsfirmen:
- Schnelles Gießen von Einzelstücken oder Mustern unabhängig von bestehenden Gießeinrichtungen.
- Schnellguss / Blitzguss:
- Mit speziellem Einbettmaterial lässt sich die Zeit vom Wachsmodell bis zum fertig gegossenen Metall auf 3 Stunden reduzieren.
- Durch die sehr kompakte Bauform findet die "MC16" auch in der kleinsten Werkstätte Platz:
- Gießerei
- Goldschmiede
- Dentaltechnik
- Modellbau
- Labore
Prozessinformationen:
- Der gesamte Gießprozess lässt sich auch ohne große gießtechnische Vorkenntnisse einfach, schnell und sicher durchführen.
- Die Handhabung der Mini-Gießanlage ist denkbar einfach:
- 1. Material einfüllen und aufheizen
- 2. Küvette aus dem Brennofen holen & in die Maschine einlegen. Alle weiteren Funktionen werden von der Maschine übernommen – bis der geniale Dreh kommt:
- 3. Das Abgießen erfolgt durch eine 90°-Drehung der gesamten Gießeinheit. Um die Formfüllung zu optimieren, schaltet die 'MC 16' nach dem Schwenken automatisch auf Überdruck um.
Produkteigenschaften:
- Gießmaschine:
- Die Anlage ist für kleinere Produktionsmengen bestens geeignet.
- Kompaktes Tischmodell, Anschluss an 230 V Steckdose.
- Einfache Handhabung, sicher beherrschbar, auch ohne tiefere Kenntnisse der Gießtechnik.
- NEU: Kompletter Prozessablauf über Programm steuerbar!
- NEU: Anzeige über LC-Display!
- Materialien:
- Für den Präzisionsguss bietet es alle Voraussetzungen, um optimale Gussergebnisse bei geringem Materialaufwand zu erzielen.
- Dies gilt für Metalle wie Silber, Gold, Messing, Bronze, Stahl, Palladium und Platin (Metalle bis 2000 °C)
- Blech- & Drahteingusskokillen unter Vakuum gießbar.
- Temperaturen:
- Die Metallgießanlage ist einsetzbar für alle Metalle bis 2000 °C.
- Eingebaute Temperaturregelung mit Thermoelement 1300 °C oder 1400 °C für Edelmetallgüsse im Grafittiegel.
- Integrierte Halterung für getönte Schauglasfolie (Schauglas optional) beim Stahl- & Platinguss
- Induktion-Vakuum-Druck:
- Schnelles Aufheizen des Metalls durch Induktionsgenerator mit 3,5 kW und elektronischer Abstimmung (PWM) auch von schwierig zu schmelzenden Metallen (z.B. 950 Pd.).
- Starke Metalldurchmischung = homogene Schmelze.
- Hervorragendes Gießergebnis durch Vakuum-Druckguss-Verfahren.
- Optimales Ergebnis: Materialschmelze unter Schutzgas/Vakuum („entgasen“ von Legierungen).
- Küvette wird sofort nach dem Abguss unter Schutzgas-Überdruck bis 2 bar gesetzt, Dadurch exzellente Formfüllung.
- Überdruck Start kann in Winkelgraden definiert werden.
- Automatisierter Gießablauf für wiederholbare Resultate.
- Keine Küvettendichtung erforderlich
- Tiegel:
- Spezielle Tiegel für Gold/Silber/Messing/Bronze etc. mit Grafit-Einlage.
- Einfacher Tausch der Tiegel, preisgünstige Verbrauchsteile mit langen Standzeiten.
- Tiegelschutzrohr aus Quarz verhindert Beschädigung der Maschine bei Tiegelbruch.
- Kühlung:
- Wasserdurchflusssensor ermöglicht sichere Kühlwasserversorgung.
- MADE IN GERMANY
Technische Daten:
- Elektrik:
- Spannung: 230 V, 1-phasig
- Frequenz: 50/60 Hz
- Anschlusswert: 16 A
- Leistung: 3,5 kW
- Temperaturen:
- mit Fühler "Typ N": < 1300 °C
- mit Fühler "Typ S": < 1500 °C (optional)
- ohne Fühler: < 2.000 °C
- Kapazitäten:
- Gold: 100 g AU 750/-
- Platin: 200 g Pt
- Stahl: 110 g Fe
- Silber: 84 g Ag
- Küvettengrößen: (Gießmuffel)
- min. Ø 30 x 55 mm
- max. Ø 80 x 80 mm
- Maße: (H/B/T):
- Anschlüsse:
- Wasserzu- & abgang: Schnellkupplung für Schlauch-Ø 6/4 mm
- Vakuum: Schnellkupplung für Schlauch-Ø 8/6 mm
- Gaszugang: Schnellkupplung für Schlauch-Ø 8/6 mm
- Gasauslass: offen
- Gewicht:
Lieferumfang:
- #1005483 Mini-Vakuum-Druck-Induktionsgießanlage "MC 16" mit Grundausstattung für Küvetten-Ø 80 mm
- mit Grundausstattung: (*)
- siehe Übersicht Gerätezubehör
- Bedienungsanleitung auf USB-Stick & Kurzanleitung für Inbetriebnahme
- Abholpreis: Im Lieferumfang ist keine Sonderverpackung enthalten!
Varianten: (Übersicht 'MC'-Serie)
- #1005483 Mini-Vakuum-Druck-Induktionsgießanlage 'MC 16' | 230 V | 3,5 kw | <2000 °C | mit Küvetten-Ø 80 mm
- #1004250 Mini-Vakuum-Druck-Induktionsgießanlage 'MC 20V' | 230 V | 3,5 kw | <2000 °C | mit Küvetten-Ø 80 mm
- #1005484 Mini-Vakuum-Druck-Induktionsgießanlage 'MC 60V' | 230 V | 3,5 kw | <1500 °C | mit Küvetten-Ø 100 mm
- #1004252 Mini-Vakuum-Druck-Induktionsgießanlage 'MC 100V' | 230 V | 3,5 kw | <2000 °C | mit Küvetten-Ø 100 mm
Optionen: (Übersicht
Gerätezubehör)
- Küvetten:
- #1004525 Adapter 'MC 16+20V' | für Küvetten-Ø 30 mm in Länge: 55 mm | 1-tlg.
- #1004518 Küvette 'MC 15-20V' | Ø 30 x 55 x 1,5 mm | ungelocht | V2a <1050 °C
- #1004526 Adapter 'MC 16+20V' | für Küvetten-Ø 50 mm in den Längen: 55 + 80 mm | 2-tlg.
- #1004519 Küvette 'MC 15-20V' | Ø 48 x 55 x 1,5 mm | ungelocht | V2a <1050 °C
- #1004520 Küvette 'MC 15-20V' | Ø 50 x 80 x 1,5 mm | ungelocht | V2a <1050 °C
- #1004528 Adapter 'MC 16+20V' | für Küvetten-Ø 65 mm in den Längen: 50 + 80 mm | 2-tlg.
- #1004521 Küvette 'MC 15-20V' | Ø 65 x 55 x 1,5 mm | ungelocht | V2a <1050 °C
- #1004522 Küvette 'MC 15-20V' | Ø 65 x 80 x 1,5 mm | ungelocht | V2a <1050 °C
- #1004530 Adapter 'MC 16+20V' | für Küvetten-Ø 80 mm in den Längen: 50 + 80 mm | 2-teilig | (*)
- #1004523 Küvette 'MC 15-100V' | Ø 80 x 55 x 1,5 mm | ungelocht | V2a <1050 °C
- #1004524 Küvette 'MC 15-100V' | Ø 80 x 80 x 1,5 mm | ungelocht | V2a <1050 °C | (*)
- #1004509 Küvettenzange für Küvetten-Ø 30-80 mm | V2a | 400 mm | leichte Ausführung | (*)
- Gummiteller:
- #1004514 Gummiteller, blau | für Küvetten-Ø 30 mm & Ø 8 mm Mittelstamm
- #1004515 Gummiteller, blau | für Küvetten-Ø 50 mm & Ø 8 mm Mittelstamm
- #1004516 Gummiteller, blau | für Küvetten-Ø 65 mm & Ø 8 mm Mittelstamm
- #1004517 Gummiteller, blau | für Küvetten-Ø 80 mm & Ø 8 mm Mittelstamm
- #1005444 Gummiteller, schwarz | shore 65 | für Küvetten-Ø 50 mm & Ø 8 mm Mittelstamm
- #1005436 Gummiteller, schwarz | shore 65 | für Küvetten-Ø 65 mm & Ø 8 mm Mittelstamm
- #1003110 Gummiteller, schwarz | shore 65 | für Küvetten-Ø 80 mm & Ø 8 mm Mittelstamm | (*)
- Tiegel:
- #1004532 Keramiktiegel 'MC 15-20V' | <1300 °C | mit Grafiteinsatz | i-Ø 18 x 35 mm | für <10 cm³ Gold & Silber
- #1004533 Keramiktiegel 'MC 15-20V' | <1600 °C | unbeschichtet | a/i-Ø 47/24 x 71/45 mm | für <20 cm³ Stahl
- #1004534 Keramiktiegel 'MC 15-20V' | <2000 °C | CrO²-beschichtet | i-Ø 21 x 30 mm | für <20 cm³ Platin
- #1005590 Tiegelschlichte Zirkonoxid | 50 g | mit Pinsel | für Keramiktiegel (Platin)
- #1004508 Induktorschutzrohr 'MC 15-20V' | Quarzglas Ø 40 x 92 mm | mit Bodenschutzpad | zum Schutz bei Tiegelbruch
- Thermoelemente:
- #1004503 Thermoelement 'MC 15-20V' | 'Typ N' = zum Gießen von Metallen bis <1300 °C | (*)
- #1004504 Thermoelement 'MC 15-20V' | 'Typ S' = zum Gießen von Metallen bis <1400 °C
- #1004505 Schutzrohr 'MC 15-20V' | für Thermoelemente 'Typ N+S' | Ø 4 x 45 mm | <1.400°C | (*2x)
- #1004569 Blindstecker 'MC 15-20V' | mit Niederhalter für Tiegel | zum Gießen ohne Thermoelement (*)
- Eingüsse:
- #1000000 Graphiteinguss in/mit Küvette Ø 65 x 80 mm | für Band 8 x 25 x 60 mm | <1250 °C
- #1005797 Graphiteinguss lose Ø 50 x 75 mm | für Draht Ø 10 x 50 mm, konisch | <1250 °C
- #1000000 Graphiteinguss lose Ø 80 x 80 mm | für Draht Ø 20 mm ,konisch | <1250 °C | (*)
- #1000000 Kupfereinguss für Küvette Ø 65 x 80 mm | 2tlg. | für Band 5 x 20 x 50 mm | für Material <2000 °C
- #1000000 Kupfereinguss lose Ø 80 x 65 mm | 2tlg. | für Draht-Ø 12 mm, konisch | für Material <2000 °C
- Sonstiges Zubehör:
- #1004505 Schauglasfolie | goldfarben/grün | Blendschutz für Schmelze >1600 °C | 1 x 72 x 82 mm | (*)
- #1005790 Filtereinsatz für Vakuumanschluss Ø 26 x 32 mm | weiß | Kunststoff | ohne Schauglas
- #1005499 Druckschlauch aus PE | blau | Ø 6/4 mm | 1-25 Meter | (Preis pro Meter) | (*4m)
- #1005500 Druckschlauch aus PE | blau | Ø 8/6 mm | 1-25 Meter | (Preis pro Meter) | (*4m)
- Verpackung:
- #1006511 Sonderverpackung: Palettenkiste für Gießanlagen 'MC 15-60V' | (H/B/T) 650 x 800 x 600 mm | 19 kg
-
- (*) = jeweils 1x in Grundausstattung enthalten!
- Alle Teile des Gerätes können einzeln bestellt & ausgetauscht werden.
Optionen: (Übersicht
Peripherie)
- Einbetten:
- #1004701 Einbettmaschine 'Mix 2+' | für 1 Küvette <Ø 100 x 120 mm & 1 kg Einbettgemisch
- Schutzgas:
- #1006316 Druckregler 'Pro-Control' für Schutzgas (Argon/CO²) | Anzeigen: 0-315 & 0-16 bar
- Vakuum:
- #1001711 Vakuumpumpe 'BUSCH 21 m³/h, 400 V' | Enddruck: 1 mbar | 400 V / 3 ph. 50 Hz. | ohne Gasbalastventil
- #1006183 Vakuumpumpe 'BUSCH 25 m³/h, 400 V' | Enddruck: 1 mbar | 400 V / 3 ph. 50 Hz. | mit Gasbalast
- #1005866 Verteiler für Gas/Wasser/Druckluft/Vakuum | 2 Hähne + Schnellkupplungen Ø 8 mm
- Wasserkühlung:
- #1004537 Wasserrückkühler mit 4,0 kw Kälteleistung | für Gießanlagen 4,5-8 kW | Pumpe 5 bar | 230 V
- Ausbrennen:
- #1005479 Entwachsofen 'H-EW 06' mit Steuerung 'ST 411' | Tischgerät | 7,8 Liter | 1000 °C | 1,8 kW | 230 V
- #1005480 Entwachsofen 'H-EW 15' mit Steuerung 'ST 411' | Tischgerät | 18,2 Liter | 1000 °C | 2,3 kW | 230 V
- #1005481 Entwachsofen 'H-EW 20' mit Steuerung 'ST 411' | Tischgerät | 22,4 Liter | 1000 °C | 3,0 kW | 230 V
- #1005482 Entwachsofen 'H-EW 40' mit Steuerung 'ST 411' | Tischgerät | 42,5 Liter | 1000 °C | 5,0 kW | 400 V
- Wasserstrahlen:
- #1005372 Wasserstrahlkabine 'WSK 120' | 230 V | 120 bar | aus Edelstahl mit Klappdeckel & Beleuchtung
- Sandstrahlen:
- #1005365 Flüsterkompressor 'HK 1500' | 1500 W | Tank 50 L | Ansaugmenge: 200 L
- #1004265 Umlaufstrahlgerät 'B-1' | 230 V | <8 bar | Einkammersystem | mit fester Düse
- #1004216 Absauganlage 'Hormat 1200' | regelbar | für 2 Arbeitsplätze | mit 1 Saugschlauch+Stecker
- Gerne unterbreiten wir Ihnen Ihr Komplettangebot: Kontaktieren Sie uns per E-Mail.
Garantie:
- 1 Jahr auf Gerät bei bestimmungsgemäßer Verwendung
- ausgenommen Verschleißteile
Notwendig für den Betrieb:
- Vakuum:
- Vakuumpumpe mind. 8 m³ Ansaugleistung & 0 bis 20 mbar absolut
- Schlauch mit Ø 8/6 mm
- Schutzgas:
- Argon oder Stickstoff
- konstanter Druck 6-8 bar
- Gaszugang: Schlauch mit Ø 8/6 mm
- Druckregler für Argon/CO², Anzeigen: 200 & 0-10 bar (Keinen Durchflussregler verwenden!)
- Kühlwasseranschluss:
- Wasserrückkühler ab 1,0 kW empfohlen
- Wasser Eingangstemperatur: 15-25 °C (Ideal: 20 °C)
- Wasser Druck: 2,5 - 5,0 bar (Ideal: 3 bar)
- Wasser Durchlauf: 100 l/h = 1,67 l/min. (min. Grenzwert: 0,9 l/min.)
- Wasserzu- & -ablauf: Schlauch mit Ø 6/4 mm
- beachten Sie bitte beim Anschluss an das Wassernetz o. a. Parameter sowie entsprechenden Kalkgehalt/Entkalkung
Service:
- HORBACH-Gieß- & Formenbauseminare in unserem Hause
- HORBACH-Garantieabwicklung für bei uns gekaufte Geräte
- HORBACH-Wartungs- & Reparaturservice in eigener Werktstatt (auch Fremdgeräte)
- GRENKE-Leasingempfehlung
09/23
Mini-vacuume-pressure-induction-casting-device "Indutherm MC 16"
The induction casting machine "MC 16" is the successor model of the "MC 15+". This was specially developed for the requirements of independent goldsmiths, jewelry studios and lobors in medical technology, but has now also established itself in many large and well-known jewelry companies and laboratories as the ideal casting system for small series and custom-made products.
Field of applications:
- The equipment is best suited for smaller production quantities.
- Casting smaller quantities of metal (200 g platinum, 100 g gold 750, 85 g silver 925, 110 g steel).
- Casting of single pieces, samples, rapid prototyping parts and platinum blanks for rolling.
- In large production companies: Rapid casting of single pieces or samples independent of existing casting equipment.
- Flash casting: With special investment material, the time from wax pattern to finished cast metal can be reduced to 3 hours.
- Thanks to its very compact design, the "MC 16" can be accommodated in even
- the smallest workshop.
- casting department
- goldsmith
- dental
- modelmaking
Handling of the mini casting system:
- The entire casting process can be carried out easily, quickly and safely, even without much prior knowledge of casting technology. The handling of the mini casting system is very simple:
- 1. Fill in material and heat up
- 2. Remove the flask from the furnace and insert it into the machine. All other functions are taken over by the machine - until the ingenious twist comes along:
- 3. Casting is performed by a 90° rotation of the entire casting unit. To optimize mold filling, the "MC 16" automatically switches to overpressure after swiveling.
Product features:
- Casting machine:
- The machine is best suited for smaller production quantities.
- Compact table model, connection to 230 V socket.
- Easy handling, safely controllable, even without deeper knowledge of casting technology.
- NEW: Complete process sequence controllable via program!
- NEW: Display via LC-Display
- Materials:
- For precision casting, it offers all the prerequisites for achieving optimum casting results with low material input.
- This applies to metals such as silver, gold, brass, bronze, steel, palladium and platinum (metals up to 2000°C)
- Sheet/wire casting molds can be cast under vacuum.
- Temperatures:
- The metal casting machine can be used for all metals up to 2000°C.
- Built-in temperature control with thermocouple 1300°C or 1400°C for precious metal castings in graphite crucible.
- Integrated holder for tinted sight glass foil (sight glass optional) for steel & platinum casting.
- Induction - vacuum - pressure:
- Fast heating of the metal by induction generator with 3.5 kW and electronic tuning (PWM) even of difficult to melt metals (e.g. 950 Pd.).
- Strong metal mixing = homogeneous melt.
- Excellent casting result due to vacuum die casting process.
- Optimum result: material melting under protective gas/vacuum ("degassing" of alloys).
- Flask is placed under protective gas overpressure up to 2 bar immediately after casting, resulting in excellent mold filling.
- Overpressure start can be defined in angular degrees.
- Automated casting sequence for repeatable results.
- No flask seal required
- Crucibles:
- Special crucibles for gold/silver/brass/bronze etc. with graphite insert.
- Easy crucible replacement, low cost consumable parts with long service life.
- Crucible protection tube made of quartz prevents damage to the machine in case of crucible breakage.
- Cooling:
- Water flow sensor enables safe cooling water supply.
- MADE IN GERMANY
Technical datas:
- electricity:
- voltage: 230 V, 1-phasig
- frequency: 50/60 Hz
- Anschlusswert: 16 A
- power: 3,5 kW
- temperatures:
- with sensor "Typ N": < 1300 °C
- with sensor "Typ S": < 1500 °C (option)
- without sensor: < 2.000 °C
- capacities:
- gold: 100 g AU 750/-
- platinum: 200 g Pt
- steel: 110 g Fe
- silver: 84 g Ag
- flasksizes:
- min. Ø 30 x 55 mm
- max. Ø 80 x 80 mm
- connections:
- water inlet & outlet: Quick coupling for 6/4 mm hose
- vacuum: quick coupling for 8/6 mm hose
- gas access: quick coupling for 8/6 mm hose
- gas outlet: open
- dimensions: (b/t/h) 400 x 450 x 400 mm
- emtyweight: 27 kg
Scope of delivery:
- #1005483 casting machine MC 16
- Basic equipment: (machine equipped with flask-Ø 80 mm)
- flaskØ 80 x 80 mm
- ceramic crucible (10 cm³) with graphite inlay for gold/silver up to 1300 °C, pre-fired
- ceramic crucible (15 cm³) for steel with 3 stainless steel rods Ø 18 x 25mm (=150 g)
- ceramic crucible (15 cm³) with zirconium oxide coating for platinum
- crucible coating zirconium oxide 50 g & brush, for ceramic crucible (platinum)
- crucible protection quartz Ø 40 x 92 mm with bottom protection pad
- casting muffle made of graphite Ø 80 x 80 mm, conical, for wire casting
- flask adapter Ø 80mm, 2 pcs. with intermediate bottom
- flask tongs for flask Ø 30 - 80 mm, length: 400 mm
- rubber plate for flask-Ø 80 mm with cone Ø 8 mm, blue
- sight glass foil (1 x 72 x 82 mm) green/gold-colored as glare protection
- dummy plug with hold down
- Thermocouple 1300 °C
- 2 thermocouple protection tubes Ø 4 x 45 mm
- 4 push-in fittings, pre-assembled
- 2 x 4 m pneumatic hoses
- vacuum filter insert, white, spare
- operating instructions & quick start guide
Necessary connections:
- Vacuum pump min. 8m³ suction capacity
- Compressed air or argon inert gas
- Cooling water connection:
- Water recooler 1.0 kW recommended
- Water inlet temperature: 15-25 °C (ideal: 20 °C)
- Water pressure: 2.5 - 5.0 bar (ideal: 3 bar)
- Water flow rate: 1.2 -1.4 l/min. (min. limit: 0.9 l/min.)
- When connecting to the water network, please observe the above parameters and the corresponding lime content/decalcification.
Options:
- Equipment:
- Device with basic equipment for cuvettes Ø 50 mm
- adapter for Ø 65 or Ø 50 flasks (each in different lengths)
- rubber plate for flasks-Ø 30 mm, Ø 50 mm, Ø 65 mm, Ø 80 mm
- Thermocouple "TYPE S" for casting metals up to 1400 °C
- Peripheral devices:
- #1004501 Waterchiller "Profi 11" | 1kW | unit: tank, pump, cooling, temperature control
- #1004500 Vacuum pump | 8 m³/h | 230 V | final pressure 0,1 mBar
- embedding machine
- burn-out kiln
- magnetic polisher
- sand blaster
- water jet cabin
Warranty:
- 1 year for device
- excluding wearing parts
Service:
- When you buy a casting machine, you will receive a casting seminar in our company free of charge
- Leasing possible
- HORBACH-warranty-service for all our machines
- HORBACH-maintenance & repairservice department
10/22
Preis:
10.920,00 EUR
zzgl. 19 % MwSt. zzgl. Versandkosten
10.920,00 EUR pro Stück