Art.Nr.: 1001796
Tiegelschmelzofen 'Melt-1 plus'
Dieser Tiegelschmelzofen wurde speziell zum Schmelzen von Metallen für bis zu 1 kg (Gold) in Werkstätten & Betrieben konzipiert. Eine leistungsfähige Widerstandsheizung bringt den Ofen in kurzer Zeit auf eine Temperatur von bis zu 1.120 °C.
Verwendungszweck:
- zum Schmelzen von Metallen bis 1120 °C
Anwendungsgebiet:
- Schmuckproduktion in Gold- & Silberschmiedewerkstätten
- Modellbauproduktionen
- für Metalle bis 1120 °C:
- Gold, Silber, Messing, Bronze, Kupfer
Produkteigenschaften:
- Tiegelschmelzofenserie 'Melt plus'
- zum Schmelzen von 1 bis zu 4 kg Legierung (je nach Ausführung)
- kurze Aufheizzeiten (bis ca. 900 °C in nur etwa 15 Minuten).
- für Legierungen mit Schmelztemperaturen bis 1120 °C
- stufenlos einstellbare digitale Steuerung
- beleuchteter Ein-/Aus-Kippschalter
- isolierter Deckel mit Hitzeschutzgriff
- seitliche Transportgriffe am Gehäuse (nur bei 'Melt-4 plus')
- rutschfeste Gummifüße
- Tiegel aus Reingraphit
- Steuerung:
- Digitalregler & Miniprogrammierer mit unabhängiger Zeitschaltung
- Anzeige:
- digital
- zweizeilige Anzeige (rot & grün), 4-stellig (Höhe: 7 mm)
- Regelung:
- EIN/AUS-Regelung mit neutraler Zone mit Verdichterschutz-Zeit
- PID mit einfacherer und doppelter Wirkung mit Overshoot Control, Self-Tune und Kontrolle der Haltezeiten (guaranteed soak)
- Gesamtgenauigkeit: ± 0.5 % fs + 1 Digit; tc S ± 1% fs + 1 Digit
- 1 Programm aus 8 Schritten mit Segment-Datensicherung, 2 Ereignisse und Kontrolle der Haltezeiten
- unabhängige Zeitschaltung mit 5 Betriebsarten
- Wattmeter zur Berechnung der Momentanleistung und des Energieverbrauch
- Anschlüsse:
- Temperaturfühler-Eingang: tc J, K, R, S, T;
- Infrarot-Sensor J und K
- bis zu 2 Relaisausgänge oder spannungsführend für SSR-Schaltung
- Ausgang Zusatzversorgung: 12 VDC/20 mA max
- Front-Schutzart IP65 mit Dichtung
- Maße: 78 x 35 mm, Einbautiefe 75,5 mm
- MADE IN ITALY
Technische Daten:
- Tiegelschmelzofen 'Melt-1 plus':
- Spannung: 230 V
- Frequenz: 50/60 Hz
- Leistung: 850 W
- Temperatur: <1.120 °C
- Gesamtgenauigkeit: ± 0.5 % fs + 1 Digit; tc S ± 1% fs + 1 Digit
- Gewicht: 6,7 kg
- Außenmaße ohne Griffe (H/B/T): 350 mm x 215 mm x 230 mm
Lieferumfang:
- #1001796 Tiegelschmelzofen 'Melt-1 plus' | 850 W | <1120 °C | Kapazität 1 kg | Maße: 350 x 215 x 230 mm | Gewicht: 6,7 kg
- Zubehör:
- Schmelztiegel aus Reingrafit
- Rührstab aus Grafit
- Tiegelzange mit isoliertem Griff ('Melt-1 + 2 + 3 plus')
- Tiegelzange mit extra langem Griff ('Melt-4 plus')
- Anschlusskabel 230 V
- Bedienungsanleitung
Varianten:
- #1001796 Tiegelschmelzofen 'Melt-1 plus' | 850 W | <1120 °C | Kapazität 1 kg | Maße: 350 x 215 x 230 mm | Gewicht: 6,7 kg
- #1002984 Tiegelschmelzofen 'Melt-2 plus' | 1300 W | <1120 °C | Kapazität 2 kg | Maße: 385 x 215 x 230 mm | Gewicht: 7,2 kg
- #1002985 Tiegelschmelzofen 'Melt-3 plus' | 1700 W | <1120 °C | Kapazität 3 kg | Maße: 385 x 215 x 230 mm | Gewicht: 7,2 kg
- #1005393 Tiegelschmelzofen 'Melt-4 plus' | 2200 W | <1120 °C | Kapazität 4 kg | Maße: 400 x 310 x 310 mm | Gewicht: 8,0 kg
-
- Version in 110 V auf Anfrage!
Optionen:
- #1002988 Reingrafittiegel für Tiegelschmelzofen | <1 kg Material
- #1002989 Reingrafittiegel für Tiegelschmelzofen | <2 kg Material
- #1002990 Reingrafittiegel für Tiegelschmelzofen | <3 kg Material
- #1005394 Reingrafittiegel für Tiegelschmelzofen | <4 kg Material
- #1001656 Tongrafittiegel für Tiegelschmelzofen | <1 kg Material
- #1002986 Tongrafittiegel für Tiegelschmelzofen | <2 kg Material
- #1001659 Rührstab aus Graphit | Ø 10 x 400 mm | 44 g | zum Rühren in der Schmelze
- #1001660 Rührstab aus Quarzglas | Ø 8 x 300 mm | 38 g | zum Rühren in der Schmelze | (langlebiger)
- #1001648 Tiegelzange | isoliert für Kragentiegel von 0,5 kg - 3 kg
- #1000000 Tiegelzange | extra lang: 610 mm | für Kragentiegel 4 kg
Garantie:
- 1 Jahr auf Gerät bei bestimmungsgemäßer Verwendung
- keine Garantie bei Beschädigungen durch Anwendung (z. B. Tiegelbruch, Heizspirale)
Service:
- HORBACH-Garantieabwicklung für bei uns gekaufte Geräte
- HORBACH-Wartungs- & Reparaturservice in eigener Werktstatt (auch Fremdgeräte)
10/23
Electric furnace "Melt-1 plus" for melting precious metals
Electric furnace designed and constructed to melt precious metals and alloying, featuring to 1120 °C (2012 °F), crucible (included) capacity 1 kg Gold. Precise temperature control by settable electronic regulator, continuous survey of instant temperature trough display.
Field of applications:
- jewellery-production in gold- & silverworkshops
- model making workshops
Product features:
- electric crucible furnace "Melt plus"-series:
- for melting precious metals 1 until 4 kgs alloy.
- short heating times (only 15 min. heating time until 900 °C)
- for melting precious metals until 1120 °C
- digital controller
- lightet power button
- with cover and heat resistand handle
- non slip rubber ferrules
- crucible made of pure graphite
- controller:
- digital controller & programmer with independant timer
- display:
- digital
- double-spaced display, 4-digit, red & green (hight 7 mm)
- controlling:
- on/off with inert Zone and compressor protection time
- PID with easier and double doppelter effect with overshoot control, self-tune & retention time control (guaranteed soak)
- 1 program with 8 steps and segment-data backup, 2 incidents & controlling of retention times
- independant timer with 5 modes of operating
- wattmeter to calculate the energy consumption & the current capacity
- connections:
- temperature controller input: tc J, K, R, S, T;
- infrared-sensor J & K
- until 2 Relais output or live for SSR-switch
- output additional supply: 12 VDC/20 mA max
- front-protection class IP65 mit seal
- sizes: 78 x 35 mm, mounting depth 75,5 mm
- MADE IN ITALY
Technical data:
- crucible furnace "Melt-1 plus":
- voltage: 230 V
- frequency: 50/60 Hz
- power: 850 W
- maximum temperature: 1.120 °C
- exactness: ± 0.5 % fs + 1 digit; tc S ± 1% fs + 1 digit
- weight: 6,7 kg
- outside dimensions without handles (h/w/d): 350 mm x 215 mm x 230 mm
Scope of supply:
- #1001796 crucible furnace "Melt-1 plus": 850 W, <1120°C, capacity: 1 kg
- digital conroller
- casing with handles for easy transport ("Melt-4 plus")
- pure graphite crucible
- graphite mixing stick
- crucible tong with isolated handle ("Melt-1 + 2 + 3 plus")
- crucible tong with extra long handle ("Melt-4 plus")
- connection cable 230V
- user´s manual
Versions:
- #1001796 Crucible furnace "Melt-1 plus", 850 W, <1120°C, capacity: 1 kg, size: 350 x 215 x 230 mm, weight: 6,7 kg
- #1002894 Crucible furnace "Melt-2 plus", 1300 W, <1120°C, capacity: 2 kg, size: 385 x 215 x 230 mm, weight: 7,2 kg
- #1002985 Crucible furnace "Melt-3 plus", 1700 W, <1120°C, capacity: 3 kg, size: 385 x 215 x 230 mm, weight: 7,2 kg
- #1005393 Crucible furnace "Melt-4 plus", 2200 W, <1120°C, capacity: 4 kg, size: 400 x 310 x 310 mm, weight: 8,0 kg
-
- version in 110 V on request
Options:
- #1002988 crucible pure graphite: for 1 kg gold
- #1002989 crucible pure graphite: for 2 kg gold
- #1002990 crucible pure graphite: for 3 kg gold
- #1005394 crucible pure graphite: for 4 kg gold
- #1001656 crucible made of clay & graphite: for 1 kg gold
- #1002986 crucible made of clay & graphite: for 2 kg gold
- #1001659 graphite-mixing-stick
- #1001660 quartz-mixing-stick (longlife)
- #1001648 crucible-tong, isolated for crucibles from 0,5 kg - 3 kg
- #1000000 crucible-tong, extra long 610 mm for crucibles 4 kg
Warranty:
- 1 year for the machine
- no warranty on crucible or heating coil
Service:
- HORBACH-warranty-service for all our machines
- HORBACH-maintenance & repairservice department
09/21
Preis:
540,00 EUR
zzgl. 19 % MwSt. zzgl. Versandkosten
540,00 EUR pro Stück