Dekupiersäge "Knew Concepts MK 4", manuell

Dekupiersäge Knew Concepts MK 4, manuell
Dekupiersäge Knew Concepts MK 4, manuell
Dekupiersäge Knew Concepts MK 4, manuell
Für eine größere Ansicht klicken Sie auf das Vorschaubild
799,00 EUR
799,00 EUR pro Set
zzgl. 19 % MwSt. zzgl. Versandkosten
Lieferzeit: auf Anfrage auf Anfrage
Art.Nr.: 1006213


Produktbeschreibung

Dekupiersäge "Knew Concepts MK 4"
mit manueller Präzisionssägeführung
 
Anwendung:
  • zum präzisen Aussägen von:
    • Stanzformen
    • Wachsformen
    • Intarsien (mit kleinerer Säge)
  • kombinierbar mit GRS-Systemen/Halterungen

Produktinformation:
  • manuelle Dekupiersäge "Knew Concepts MK 4"
    • in den Bügeltiefen 127 mm (optional) oder 203 mm erhältlich
    • mit Spannbügel und drehbarer Feinjustierschraube
    • Holzgriff (Softgriff optional)
  • Sägeführungseinheit:
    • mit kugelgelagerten Gleitschienen
    • lässt die Säge beim Sägen nach vorne und hinten schwingen, was eine viel natürlichere Bewegung beim Sägen darstellt.
    • Dies verbessert die Benutzerfreundlichkeit und reduziert den Kraftaufwand beim Sägen im Vergleich zu früheren Sägekonstruktionen radikal.
  • kippbarer Sägetisch zum Schneiden von Stanzformen und Wachs
    • mit integriertem Winkelmesser für eine einfache Winkeleinstellung
    • schnelle Einstellung gängiger Winkel per vorkonfigurierten Stellräder
  • wählbare Befestigungssysteme zur Befestigung der Sägen an der Werkbank:
    • am Werkbrett anschraubbare Platte mit Schwalbenschwanzaufnahme (optional)
    • Klemme mit Schwalbenschwanzaunahme zum mobilen Einsatz der Säge an anderen Arbeitsplätzen etc.
    • Bei beiden Versionen lassen sich die Werkzeuge schnell und einfach von den Schwalbenschwanzaufnahmen lösen und einlagern.
    • Dadurch wird wertvoller Platz auf der Werkbank frei, wenn sie nicht benutzt wird.
  •   MADE    IN    USA  

Technische Daten
  • Bügeltiefen: 127 oder 203 mm
  • für Sägeblattlänge: 130 mm
  • Rahmenstärke: mm
  • Gewicht:  g

Lieferumfang:
  • #1006213 Dekupiersäge "Knew Concepts MK 4", manuell, 203 mm Bügeltiefe, SET bestehend aus:
    • 1 x #304.200      Sägeführungseinheit für "Knew Concepts MK 4", mit Schwalbenschwanz
    • 1 x #304.100      Sägetisch mit Neigungsverstellung für "Knew Concepts MK 4" & Schwalbenschwanz
    • 2 x #350.100      Tischklemme mit Schwalbenschwanzaufnahme & eingelassenem Magnet, für "Knew Concepts MK 4"
    • 1 x #124.008CS Bügelsäge "Knew Concepts MK 4" mit Spannbügel, drehbarer Feinjustierschraube

Varianten: (auf Anfrage!)
  • #304.005  Dekupiersäge "Knew Concepts MK 4", manuell, 127 mm Bügeltiefe, (Set aus: #304.200 | #304.100 | 2 x #350.110 | #124.005CS) ¤ 675,-
  • #304.015  Dekupiersäge "Knew Concepts MK 4", manuell, 203 mm Bügeltiefe, (Set aus: #304.200 | #304.100 | 2 x #350.100 | #124.005CS) ¤ 699,-
  • #304.008  Dekupiersäge "Knew Concepts MK 4", manuell, 127 mm Bügeltiefe, (Set aus: #304.200 | #304.100 | 2 x #350.110 | #124.008CS) ¤ 775,-
  • #1006213 Dekupiersäge "Knew Concepts MK 4", manuell, 203 mm Bügeltiefe, (Set aus: #304.200 | #304.100 | 2 x #350.100 | #124.008CS) ¤ 799,-

Optional:
  • Zubehör:
    • #1005898  Softgriff für Bügelsäge "Knew Concepts", schwarz: Ø 38/22 mm,
  • Sägeblätter "Super Pike", 1 Gros (=144 Stück), Made in Switzerland:
    • #1000503e Sägeblätter, Super Pike 8/0, (Ø 0,16 mm, 38,5 Zähne/cm)
    • #1000503d Sägeblätter, Super Pike 7/0, (Ø 0,17 mm, 35 Zähne/cm)
    • #1000503c Sägeblätter, Super Pike 6/0, (Ø 0,18 mm, 32 Zähne/cm)
    • #1000503b Sägeblätter, Super Pike 5/0, (Ø 0,20 mm, 28 Zähne/cm)
    • #1000503   Sägeblätter, Super Pike 4/0, (Ø 0,22 mm, 26,5 Zähne/cm)
    • #1000503a Sägeblätter, Super Pike 3/0, (Ø 0,24mm, 23,5 Zähne/cm)
    • #1000503a Sägeblätter, Super Pike 2/0, (Ø 0,26 mm, 22 Zähne/cm)
    • #1000503a Sägeblätter, Super Pike 0, (Ø 0,28 mm, 20,5 Zähne/cm)
    • #1000503a Sägeblätter, Super Pike 1, (Ø 0,30 mm, 19 Zähne/cm)
    • #1000503a Sägeblätter, Super Pike 2, (Ø 0,34 mm, 17,5 Zähne/cm)
    • #1000503a Sägeblätter, Super Pike 3, (Ø 0,36 mm, 16 Zähne/cm)
01/22

-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Precision saw frame "Knew Concepts MK 3Ti"
with saw guide

Product features:
  • precision saw frame: "Knew Concepts MK 4"
  • with lever tension
  • with swiveling blade clamps
  • wooden handle
  •   MADE    IN    USA  
  • New, and totally redesigned Mk IV Precision Saw Guide.
    • Now in two versions: one optimized for jewelry tasks like blanking and matrix dies, and one optimized for marquetry cutting. This page is the listing for the Die Saw version. The Small Marquetry Saw will be listed separately.
  • The Mk4 versions have been improved in other areas:
    • The saw frame is now one of our heavy duty Mk4 saws, available in either 5" or 8" depth.
    • This Die Saw version has a tilting bench pin optimized for cutting dies and wax
    • Both versions are available with either a pair of dovetail plates to mount the saws to the bench by way of screwed on dovetail plates, or with a pair of dovetail clamps, which allow the saws to be moved around the shop, or taken to workshops or other locations.
    • Both versions come off the dovetails quickly and easily, allowing for instant storage.
    • Freeing up valuable bench space when not in use.
    • Both versions have built in protractors for easy angle settings. The Die Saw version also has a system of speed wheels that allow for quick setting of common angles without needing to watch the protractor.
  • The saw frame is now one of our heavy duty Mk4 saws, available in either 5" or 8" depth.
  • This Die Saw version has a tilting bench pin optimized for cutting dies and wax
  • Both versions are available with either a pair of dovetail plates to mount the saws to the bench by way of screwed on dovetail plates, or with a pair of dovetail clamps, which allow the saws to be moved around the shop, or taken to workshops or other locations.
  • Both versions come off the dovetails quickly and easily, allowing for instant storage.
  • Freeing up valuable bench space when not in use.
  • Both versions have built in protractors for easy angle settings. The Die Saw version also has a system of speed wheels that allow for quick setting of common angles without needing to watch the protractor.
  • The biggest improvement is the new saw guide tower with ball bearing slides.
  • The new guide tower lets the saw swing fore-and-aft as you cut, which is a much more natural motion for sawing. This improves ease of use, as well as radically reducing the effort of cutting, as compared to previous die saw designs.
  • What’s the difference between the various versions?
    • First, there are two distinct saws: one for marquetry, and one for cutting dies. This page is for the die saw version. The small Marquetry Saw is listed separately.
    • Then you can get either them with either 5" or 8" saws. (We recommend the 8" saws.)
    • After that, you can pick which kind of dovetail mount you need. The system requires two dovetails. But how those dovetails hang on to your bench is up to you. You can either get bare dovetails that must be screwed in place onto your bench, or you can get a pair of dovetail clamps, which have the dovetails mounted onto clamps. That will let your saw go anywhere you need it to. The dovetails are also good for mounting any other dovetail system tool you already own, like our stainless bench pin, or any of GRS’s vast line of dovetail accessories for jewelers and engravers.

Technical datas:
  • depth of frame: 203 mm / 8"
  • for sawblades: 130 mm
  • framework: mm
  • weight:  g

Scope of supply:
  • #304.018 Precision die saw KIT "Knew Concepts MK 4", with 8" saw including:
    • #304.200      Die saw fixed tower unit for "Knew Concepts MK 4"
    • #304.100      Die saw tilting table unit for "Knew Concepts MK 4"
    • #350.100      Bench clamp magnet version for "Knew Concepts MK 4"
    • #124.008CS Hand saw "Knew Concepts MK 4" with lever tension & swivel blade clamps 360°

Versions:
  • #304.005 Precision die saw KIT "Knew Concepts MK 4", with 5" saw & 2 dovetail plates (kit of: #304.200 | #304.100 | #350.110 | #124.005CS)
  • #304.015 Precision die saw KIT "Knew Concepts MK 4", with 5" saw & 2 dovetail clamps (kit of: #304.200 | #304.100 | #350.100 | #124.005CS)
  • #304.008 Precision die saw KIT "Knew Concepts MK 4", with 8" saw & 2 dovetail plates (kit of: #304.200 | #304.100 | #350.110 | #124.008CS)
  • #304.018 Precision die saw KIT "Knew Concepts MK 4", with 8" saw & 2 dovetail clamps (kit of: #304.200 | #304.100 | #350.100 | #124.008CS)

Options:
  • #1005898  Foam handgrip "Knew Concepts", black: Ø 38/22 mm
  •  
  • Sawblades "Super Pike", 1 Gros (=144 Pcs.), Made in Switzerland:
    • #1000503e Sawblades, Super Pike 8/0, (Ø 0,16 mm, 38,5 saw tooth/cm)
    • #1000503d Sawblades, Super Pike 7/0, (Ø 0,17 mm, 35 saw tooth/cm)
    • #1000503c Sawblades, Super Pike 6/0, (Ø 0,18 mm, 32 saw tooth/cm)
    • #1000503b Sawblades, Super Pike 5/0, (Ø 0,20 mm, 28 saw tooth/cm)
    • #1000503   Sawblades, Super Pike 4/0, (Ø 0,22 mm, 26,5 saw tooth/cm)
    • #1000503a Sawblades, Super Pike 3/0, (Ø 0,24mm, 23,5 saw tooth/cm)
    • #1000503a Sawblades, Super Pike 2/0, (Ø 0,26 mm, 22 saw tooth/cm)
    • #1000503a Sawblades, Super Pike 0, (Ø 0,28 mm, 20,5 saw tooth/cm)
    • #1000503a Sawblades, Super Pike 1, (Ø 0,30 mm, 19 saw tooth/cm)
    • #1000503a Sawblades, Super Pike 2, (Ø 0,34 mm, 17,5 saw tooth/cm)
    • #1000503a Sawblades, Super Pike 3, (Ø 0,36 mm, 16 saw tooth/cm)
01/22
Dekupiersäge Knew Concepts MK 4, manuell
Dekupiersäge Knew Concepts MK 4, manuell
Dekupiersäge Knew Concepts MK 4, manuell

Diesen Artikel haben wir am 24.01.2022 in unseren Katalog aufgenommen.

Artikel 7 von 25 in dieser Kategorie

'